HP 20/700 - Manual (Page 173)

172 DLT Drives and Tape Cartridges Appendix A
DLT Cleaning Issues
Table 9 on page 172 describes potential issues with cleaning cartridges
and how to resolve them.
Cleaning Light Issues
In addition to a drive just needing to be cleaned, cleaning lights can be a
result of other factors. The following table describes common causes for
cleaning lights and how to resolve them.
Table 9 DLT Cleaning Issues DLT Cleaning Issues DLT Cleaning Issues DLT Cleaning Issues
Problem Problem Problem Problem Solution Solution Solution Solution
A brand new data cartridge is used and
the library’s operator panel indicates to
clean the drive.
■ Clean the outside of the data cartridge using a damp
cloth.
■ Clean the drive using the drive cleaning procedure on
page 112 .
■ If the library’s operator panel indicates to clean the
drive again within a short amount of time, replace the
data cartridge.
Cannot load the cleaning cartridge. ■ Ensure the cleaning cartridge matches your drive type.
Cleaning cartridges are unique for each drive
technology.
Recurring cleaning message. ■ If the message reappears after cleaning the drive, the
library will indicate the need to replace the cleaning
cartridge.
■ Replace the existing cleaning cartridge with a new one.
■ If the message reappears when a particular data
cartridge is used, verify that the data cartridge is
readable by:
■ Clearing the error message.
■ Reading the tape again.
■ If the data cartridge can be read, backup data from the
damaged cartridge to another cartridge, and discard
the damaged one.