Unpacking procedures, Unpacking, Procedures – HP 2103R-CSDI User Manual
Page 30
2-6
C
H
A
P
T
E
R
2:
I
N
S
T
A
L
L
I
N
G
T
H
E
E
D
G
E
R
O
U
T
E
R
M
O
D
U
L
E
Unpacking
Procedures
To unpack the Edge Router module:
1
Verify that the module is the model you ordered by checking the model
number listed on the side of the shipping carton.
Note that the product model number printed on the shipping box differs
from the model number on the product. The model number on the
shipping box contains the prefix 3C9.
2
Remove the module, in its antistatic shielding bag, from the shipping
carton.
3
When you unpack the Edge Router module, you should:
■
Use a foot strap and grounded mat, or wear a grounded static discharge
wrist strap.
■
Touch a grounded source just before you remove the Edge Router
module from the carton.
CAUTION
: To avoid damaging the Edge Router module with ESD, use proper
grounding techniques.
Remove the module from the antistatic bag and inspect it for damage.
Always handle modules by the faceplate, being careful not to touch the
components. If the module appears to be damaged, return it to the
antistatic shielding bag, repack it in the shipping carton, and contact your
local supplier.
4
Verify that the contents of the shipment are complete. The shipment
contents are as follows:
■
Edge Router module
■
Rack-mounting kit
■
Edge Router Module Installation Guide for Ethernet
■
Release Notes for the Edge Router
m
odule
5
Store the shipping cartons and antistatic wrapping so that you can
repackage the product for storage or shipment.