Configuring dip switches, Configuring the online carrier dip switches, Configuring dip switches o – HP 2103R-CSDI User Manual
Page 32: Configuring dip, Switches
2-8
C
H
A
P
T
E
R
2:
I
N
S
T
A
L
L
I
N
G
T
H
E
E
D
G
E
R
O
U
T
E
R
M
O
D
U
L
E
Configuring DIP
Switches
DIP switches let you select the backplane network used by an ONline or
ONcore
Edge Router module.
Even if you use a network management module to manage your hub, it is
recommended that you configure the carrier DIP switches to ensure proper
network assignments in the event of management module failure.
This section describes:
■
Configuring the ONline Carrier DIP Switches
■
Configuring the ONcore Carrier DIP Switches
Configuring the
ONline Carrier DIP
Switches
ONline carrier DIP switches let you select the backplane network used by
the Edge Router module. Modules set to the same network in the hub can
communicate with each other.
The ONline Edge Router module can also be installed in an ONcore hub. For
more information, refer to the
ONcore Switching Hub Installation and
Operation Guide
(Document Number 17-00362).