About this guide, Introduction, Audience – HP 2103R-CSDI User Manual

Page 9: How to use this guide

Advertising
background image

A

B

O

U

T

T

H

I

S

G

U

I

D

E

Introduction

This guide describes how to install and configure a 3Com® ONline

or

ONcore® Edge Router module into the 3Com ONline System Concentrator

or ONcore Switching Hub. In addition, this guide provides troubleshooting

suggestions in case a problem arises with the module.

If the information in the release notes shipped with your product differs from

the information in this guide, follow the release note instructions.

Audience

This guide is intended for the following people at your site:

Network manager or administrator

Trained hardware installer or service personnel

How to Use This

Guide

Table 1 shows the location of specific information.

Table 1

How to Use This Guide

If you are looking for:

Turn to:

General information about the Edge Router module

Chapter 1

Description of the module architecture

Typical applications of the Edge Router module

Features of the Edge Router module

An overview of the installation and configuration process

Chapter 2

Procedures for unpacking the Edge Router module

Procedures for preparing to install the Edge Router module

Procedures for installing the Edge Router module

An overview of the managed configuration process

Chapter 3

Procedures for attaching a management terminal

Procedures for configuring Edge Router carrier parameters

Advertising