HP XU700 - Manual (Page 100)

100
6 Tests and Error Messages
MaxiLife Test Sequence and Error Messages
Post Test Sequence and Post Error
In this phase, MaxiLife waits for any error messages that the BIOS may
issue. If such an error occurs, then an error code is displayed on the monitor
screen.
On the HP Kayak XU700 Minitower PC Workstation, a screen similar to
the following example is displayed. The error code that appears on the LCD
status panel is the same as the one that appears on the monitor screen. If
the POST issues several error codes, only the last one is visible on the LCD
status panel.
The following diagrams show the different BIOS-generated errors.
Keyboard Test
ERROR
BIOS
LCD Status Panel
System Memory
There is a time-out of 3 seconds before
the message is displayed on the LCD
status panel and video display.
“read system memory”
MaxiLife
“Spy System
Memory”
“BIOS” ERROR
BIOS Check sum
ERROR
“BIOS”-Generated Errors
Video
Slots
BIOS
“No Video”
MaxiLife
LCD Status Panel
No Video
ERROR
Beep Codes