HP XU700 - Manual (Page 69)

69
3 Interface Cards
Network Cards
HP 10/100 TX PCI LAN Interface Features
HP 10/100 TX PCI LAN Interface LED Descriptions
Feature: Description:
RJ45 Connector Connection to Ethernet 10/100 TX autonegotiation
BootROM Protocols:
• PxE 2.0,
•
On-board socket support up to 128 Kb.
Remote Power On (RPO) Full remote power on using Magic Packet for Microsoft Windows 95,
Windows 98, Windows NT4 in APM mode.
Remote Wake Up (RWU) Enable and Wake Up from Suspend state using Magic Packet and Pattern
Matching for Microsoft Win98SE and Win2000 in ACPI mode.
This feature enables a host computer to remotely (over the network) power
on computers and wake computers up from energy-saving Sleep mode. For
these features to work, use the Setup program to configure the BIOS.
Power Management •
OnNow 1.0,
•
Advanced Power Management 1.2,
• PCI Power Management 1.1,
• WfM 2.0 compliant, ACPI.
Manageability •
Desktop Management Interface (DMI) 2.0 Dynamic driver,
•
DMI 2.0 SNMP mapper,
• PXE 2.0 Flashable BootROM (optional on socket).
Diagnostic •
Mac address DOS report tool,
•
User Diag for DOS.
LED Description Flashing Steady Off
10 LNK
Link integrity Reversed polarity Good 10 Base-T
connection between
NIC and hub. No connection
between NIC and
hub
100 LNK
Link integrity Reversed polarity Good 100 TX
connection between
NIC and hub. No connection
between NIC and
hub
ACT
Yellow:
Port traffic for
either speed Network traffic
present Heavy network
traffic No traffic