Accessory board slots, Agp slot – HP XU700 User Manual

Page 30

Advertising
background image

30

2 System Board

Accessory Board Slots

Accessory Board Slots

The following block diagram shows the position of the accessory board slots
on the system board.

AGP Slot

Minitower models of the HP Kayak XU700 are equipped with a single AGP
(Accelerated Graphics Port) graphics slot.

The AGP Pro Universal slot provides the ultimate graphics performance for
high-end graphics cards, combining AGP 4X bandwidth (with data transfer
rates up to 1056 MB/sec) with the ability to accept high-end graphics cards
drawing up to 50 W of power.

To accommodate AGP Pro cards, the AGP PRO slot connector is wider than
the standard AGP 4X connector. Additional pins have been added at both
ends of the connector to meet the increased power requirements of AGP
Pro graphics cards.

An AGP Pro card may draw power either from the existing part of the AGP
Pro connector, the extended part, or a combination of the two. In all cases,
the maximum power that may be drawn by an AGP Pro card is limited to
50 W in the Minitower models. Power on the existing part of the connector
is delivered on 5.0 V and 3.3 V rails. Power on the extension is delivered on
the 12 V and 3.3 V rails.

PCI Slot 2

PCI Slot 1

PCI Slot 3

PCI Slot 4

One 1.5V AGP slot

.

PCI Slot 5

Five 32-bit 33 MHz PCI slots

Advertising