HP XU700 - Manual (Page 82)

82
5 HP BIOS
Using the HP Setup Program
To run the Setup program, press while the initial HP logo is displayed,
immediately after restarting the PC Workstation.
Alternatively, press to view the summary configuration screen. By
default, this remains on the screen for 15 seconds, but pressing any key will
ignore this delay.
The band along the top of the Setup screen offers the following menus:
Main, Advanced, Security, Boot, Power and Exit. These are selected using
the left and right arrow keys.
The following screens are examples of a BIOS configuration.
Main Screen
The Main Screen presents a list of fields. To change a value press either the
or keys.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Power Exit
Item-Specific Help
BIOS Version: IC.11.02 .
PnP OS [No]
Reset Configuration Data: [No]
System Time: [14:42:33]
System Date: [02/08/2000]
Key Click: [Disabled]
Keyboard auto-repeat rate speed: [21.8 per Second]
Delay before auto-repeat: [0.50 Second]
Numlock at Power-on: [On]
F1 Help




   
Select Item F7/F8 Change Values F9 Setup Defaults
ESC Exit
       
Select Menu Enter Select > Sub-Menu F10 Previous Values