Hitachi PJ-TX100 - Manual (Page 23)

23
ENGLISH
Multifunctional settings
Item Description
H SIZE
Adjust the horizontal size using the ▲/▼ buttons. :
Large Small
memo This item can be selected only at a RGB signal.
memo When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
pressing the RESET button during this operation.
AUTO ADJUST
Pressing the ► (or the ENTER) button performs the automatic
adjustment.
At a RGB signal
The vertical position (V POSITION), the horizontal position (H
POSITION), the clock phase (H PHASE) and the horizontal size (H
SIZE) will be automatically adjusted.
memo Make sure that the application window is set to its maximum
size prior to attempting to use this feature. Dark pictures may still
be incorrectly adjusted. Use a bright screen when adjusting.
At a video signal
The signal type mode best suited for the respective input signal will
be selected automatically.
memo This function is available only when the AUTO is selected
to the item“VIDEO FORMAT” of the INPUT menu. For a component
video signal, the signal type is identifi ed automatically independently
of this function.
memo This operation requires approximately 10 seconds, and the
message“AUTO IN PROGRESS” is displayed during the operation.
memo This operation may not work well at some signals. If the
picture becomes unstable (ex. a irregular picture, a color lack),
please select the suitable mode to the item “VIDEO FORMAT” of
the INPUT menu.
IMAGE Menu (continued)