Remote control – Hitachi PJ-TX100 User Manual
Page 5
5
ENGLISH
Part names
STANDBY/ON button (
12
)
prepares for turning the power
on/off.
POWER indicator (
12
)
tells the state of power supply.
MENU button (
17
)
operates the menu function.
INPUT button (
13
)
toggles between the
signal ports.
COMPONENT
VIDEO
S-VIDEO
VIDEO
DVI-D
COMPUTER
POWER
MENU
ENTER
LAMP
TEMP
STANDBY/ON
INPUT
RESET
TEMP indicator (
37
)
lights or blinks when any problem about
internal temperature has happened.
LAMP indicator (
37
)
light or blinks when any problem about
the lamp has happened.
Cursor buttons (
17
)
works for adjusting or menu controlling.
ENTER button (
17
)
proceeds to the next operation at the
menu functions.
RESET button (
17
)
cancels the adjustment in progress.
* Note that the items whose functions
are performed simultaneously with
operating are nor reset.
Remote control
POWER button (
12
)
prepares for turning the
power on/off.
(the same as the
STANDBY/ON button above.)
OPT BLK button (
15
)
toggles between the
modes for the optical black.
ASPECT button (
16
)
toggles between the modes for
the aspect ratio.
Cursor buttons (
17
)
(the same as the above.)
MENU button (
17
)
(the same as the above.)
BRIGHT buttons (
16
)
controls the brightness of the
whole screen.
DVI button (
13
)
selects the DVI-D port input.
PC button (
13
)
selects the COMPUTER port input.
COMPO button (
13
)
selects the COMPONENT
VIDEO port input.
POWER
LIGHT
OPT BLK
ASPECT
MENU
BRIGHT CONTRAST COLOR
IRIS
MODE
MEMORY
ENTER
RESET
DVI
PC
AUTO
COMPO
S-VIDEO
VIDEO
LIGHT button (
11
)
turn on/off the back light for
the remote control buttons.
MEMORY button (
16
)
toggles between your
adjustments.
IRIS button (
14
)
toggles between the modes
for the iris.
ENTER button (
17
)
(the same as the above.)
RESET button (
17
)
(the same as the above.)
CONTRAST buttons (
16
)
controls the contrast of the
whole screen.
COLOR buttons (
16
)
controls the color of the whole
screen.
AUTO button (
14
)
executes automatic
adjustment.
VIDEO button (
13
)
selects the VIDEO port input.
S-VIDEO button (
13
)
selects the S-VIDEO port input.
MODE button
(
15
)
toggles between
the modes for the
picture type.