Hitachi PJ-TX100 - Manual (Page 47)

5
ENGLISH
Operating
Operating Operating
WARNING ►When the power is on, a strong light is emitted. Do not look
into the lens or vents of the projector.
Turning on the power
1. Set the power switch to the ON position.
2. Press the button STANDBY/ON (projector)
or POWER (remote control).
Displaying
1. To select an input signal, use the button INPUT (projector), or the buttons of
PC, COMPO, S-VIDEO, VIDEO, DVI (remote control).
2. To change the aspect ratio, use the button
ASPECT (remote control).
3. To fi nely adjust the picture position, use
the lens shift dials.
4. To adjust the zoom and focus, use the
zoom knob and the focus knob.
Turning off the power
1. Press the button STANDBY/ON (projector) or POWER (remote control). The
message "Power off?" will appear on the screen for approximately 5 seconds.
2. Press the button STANDBY/ON (projector) or POWER
(remote control) again while the message is visible.
Then the POWER indicator will stop blinking and light to
solid orange when the lamp cooling is complete.
3. Set the power switch to the OFF position.
The POWER indicator will go off.
POWER LIGHT
OPT BLK
ASPECT
MENU
BRIGHT CONTRAST COLOR
IRIS
MODE MEMORY
ENTER
RESET
DVI PC AUTO
COMPO S-VIDEO VIDEO
LIGHT button
(Back light)
MEMORY button
IRIS button
ENTER button
Cursor buttons
RESET button
COLOR buttons
AUTO button
POWER button
OPTBLK button
(Optical black )
ASPECT button
MENU button
CONTRAST buttons
BRIGHT buttons
PC button
(Computer)
VIDEO
button
S-VIDEO
button
MODE
button
COMPO button
(Component video)
DVI button
POWER
MENU ENTER
LAMP TEMP
STANDBY/ON
INPUT RESET
Power
switch
POWER
indicator
TEMP indicator
MENU button
INPUT button
LAMP
indicator
Cursor
buttons
ENTER
button
RESET
button
STANDBY/ON
button
POWER
(Blinking orange)
POWER
(Solid orange)
POWER POWER
(Blinking green) (Solid green)
POWER
(Solid orange)
Zoom knob
Focus knob
Lens cover
Lens shift dials