Hitachi PJ-TX100 - Manual (Page 34)

34
Maintenance
WARNING ►Please carefully read the "User's Manual - Safety Guide".
►Before caring, make sure the power switch is off and the power cord is not
plugged in.
►Be cautious of high temperature. Do not touch about the lens and ventilation
openings during use or immediately after prevent a burn.
►Never try to care for the inside of the unit yourself. Doing so is dangerous.
CAUTION ►Incorrect care could have adverse infl uence such as
discoloration, peeling paint, etc.
►Do not use cleaner or chemicals other than those listed below, including
benzene and paint thinner.
►Do not use aerosols or sprays.
►Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and
inspected by your local dealer about once every 2 years.
Caring for the lens
1. Turn off the projector, and unplug the power cord.
2. Lightly wipe the lens with a commercially available
lens-cleaning wipe. Do not touch the lens directly
with your hand.
Caring for the cabinet and remote control
1. Turn off the projector, and unplug the power cord.
2. Wipe lightly with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a
neutral cleaner dilute in water, and wipe lightly after
wringing well. Then, wipe lightly with a soft, dry cloth.
Lens
PO WE R
LIG HT OPT BLK ASP ECT
ME NU BRIG HT CO NTR AST CO LOR
IRIS
MODE MEM ORY EN TER
RESE T D VI PC AU TO
COM PO S-VIDEO VIDEO