Hitachi PJ-TX100 - Manual (Page 28)

28
Multifunctional settings
Item Description
MESSAGE
Select the TURN ON or the TURN OFF using the ▲/▼ buttons. :
TURN ON TURN OFF
When the TURN ON is selected, the following message function
works.
The message of the “AUTO IN PROGRESS” for the auto
adjustment.
The message of the ”NO INPUT IS DETECTED”
The message of the ”SYNC IS OUT OF RANGE”
The message of the “Detecting …”
The indication of the input signal by input change.
The indication of the aspect ratio by changing the aspect ratio.
The indication of “IRIS”, “BRIGHT”, “CONTRAST”, “COLOR” by
adjusting them.
SCREEN Menu (continued)
How to register your picture as the MyScreen
MyScreen is pointed on the SCREEN menu.
The MyScreen
menu appears.
Do you capture the picture from
the current screen?
Registering.
It takes about 1~2 minute to register.
Just when the picture registration is completed
the registered screen and
the message of the right is displayed for a few seconds.
If the picture registration failed,
the message of the right is displayed for a few seconds.
The picture freeze and the frame for capturing appears.
Move the frame to the position of the picture
which you want to use, using / / / buttons,
and press the ENTER button to register.
NO: Press the RESET button
YES: Press the ENTER button
If the RESET
button is pressed ...
Press the button
:NO ENTER :YES
MyScreen
Do you start capturing this picture?
RESET
:RETURN :NEXT
MyScreen
Move the capture area
as you want.
My Screen
45%
MyScreen registration is finished.
A capturing error has occurred.
Please try again.
RESET ENTER