HP 480-0005-00-15 - Manual (Page 126)

6-6 P/N 480-0005-00-15
Chapter 6: Call Detail Recording
CDR Output
The following is an example of a CDR output. Each field in a CDR string is separated by a comma (any blank
fields are designated by a comma). See below for field definitions.
There are four CDR format types:
• 0 (Standard CDR output)
• 1 (Extended CDR output)
• 3 (Extended CMS CDR output)
• 4 (Extended CMS CDR output)
• 100 (Standard CDR output plus session ID)
• 101 (Extended CDR output plus session ID)
• 103 (Extended CMS CDR output plus session ID)
• 104 (Extended CMS CDR output plus session ID)
Sample Record for Standard and Extended CDR Format 0, 1, 100, 101
Record 1 Sample: (includes fields for both Standard and Extended Formats)
1,17325551212,15,20000207062812,21060207062815,
2000020706283030,16,208.226.140.57,192.168.10.64,4,1,1,1,1,1,1,,0,0,1415551000,12345678901234,98
76543210,0123456789
Record 1 Field Definitions – Standard Formats 0 and 100
1 (Call ID), 17325551212 (Called Number), 15 (Duration), 20000207062812 (Call Initiation Time),
20000207062815 (Call Connected Time), 2000020706283030 (Call Disconnected Time), 16 (Cause
Code), 208.226.140.57 (Local IP Address), 192.168.10.64 (Remote IP Address), 4 (Origination Trunk
ID), 1 (Call Type), 1 (Call Number Type), 1 (Incoming Line),1 (Incoming Channel), 1 (Outgoing
Line), 1 (Outgoing Channel), blank AutoSwitch Time, blank (AutoSwitch Duration), 0 (Bad IP
Quality Events), 0 (AutoSwitch Flag)
Record 1 Field Definitions – Extended Formats 1 and 101
The extended format includes all fields used in the standard format plus the following fields:
1415551000 (Calling Party Number), 12345678901234 (PIN Code), 9876543210 (Remote Call ID #),
0123456789 (Local Call ID #)
Definitions for each field appears below.
Call ID: Sequence number. This is a unique number assigned to identify an individual call (i.e, 1, 2, 3,…).
The sequence number starts from 1 and wraps around at 4,294,967,295. When a Tenor CMS unit resets, the
sequence number starts from 1 again. If the system has a problem and loses connectivity, the CDR server can
send the Tenor CMS unit the last Call ID that is received. The Tenor CMS unit will reply with all records that
contain a Call ID which is greater than the one last received.