HP 480-0005-00-15 - Manual (Page 17)

1-6 P/N 480-0005-00-15
Chapter 1: Overview
Powerful System Monitoring
There are many different ways to monitor the health of the unit, including LEDs and alarms. LEDs appear on
the front of the unit (for CMS -14 slot) and the front of WAN interface cards, as well as on the DSP cards, and
the System Controller/CPU card. The LEDs light up according to operations and alarms the system is experi-
encing. Through the Command Line Interface (CLI) management system, you can view a list of active system
alarms, as well as view an alarm history. Each alarm indicates the chassis’s operational status. Tenor CMS is
also SNMP-capable with HP® Openview™ support.