HP 480-0005-00-15 - Manual (Page 18)

P/N 480-0005-00-15 1-7
Chapter 1: Overview
Capabilities
The Tenor CMS’s specific capabilities are explained below. For illustration purposes, the Tenor CMS (14 slot)
is pictured.
Line Circuit Originated Calls
Calls coming from a Line Circuit may be switched to either the data network as a VoIP call or to a Trunk Cir-
cuit typically for connection to another circuit switched network such as the PSTN. The routing decision made
by the Tenor CMS is based upon your configuration and the dialed number.
Figure 1-2 Line Circuit Call Routing
Line
Circuits
Ethernet
PSTN B
Trunk
Circuits
Trunk
Circuits
PSTN A
Ethernet
(IP Network)
Tenor CMS PBX VOIP Call
Circuit
Call
Circuit
Call
0 1 Reset + 3.3V +5V +12V -12V
Q UINTUM TECHNOLOGIES, INC.
TM
Q UINTUM TECHNOLOGIES, INC.
TM TM
Fault Fault
TM
Ground
Strap
Statu s Alarm C PU PCI
Reset
10/100
Ethe rnet
Link TX/RX 1 2 3 4
QUINTUM TM TECHNOLOGIES, INC.
Hot Swap CPU Hot Swap DS1
St at us Alarm
1 2 PCI CPU B ank DSP 1 2 TX/RX Link
1 2 3 4
5 6 7 8
10/100
Ethernet
Span
Status
TECHNOLOGIES, INC. QUINTUM TM