HP 480-0005-00-15 - Manual (Page 131)

P/N 480-0005-00-15 6-11
Chapter 6: Call Detail Recording
Outgoing Slot: If the call is outgoing, this field identifies the slot the call is going out on. Valid entry: 1-13.
This field will be empty if the call is an outgoing VoIP call.
Outgoing Device. If the call is outgoing, this field identifies the Device the call is going out on. This field is
fixed at 2.
Outgoing Digital Interface. If the call is outgoing, this field identifies which Digital Interface the call is
going out on. Valid entry: 1-8. This field will be empty if the call is an outgoing VoIP call.
Outgoing Channel. If the call is outgoing, this field identifies which channel the call went out on. Valid entry:
1-31. This field will be empty if the call is an outgoing VoIP call.
Autoswitch Time: This is the date and time the autoswitched occurred (when the call is switched from VoIP
to circuit). The entry will be in the following format: yyyymmddhhmmss where yyyy (4 digits for year), mm
(2 digits for month), dd (2 digits for day), hh (2 digits for hour), mm (2 digits for minutes), ss (2 digits for sec-
onds). If an autoswitch did not occur, this field will be blank.
AutoSwitch Duration: The number of seconds that the autoswitch call was active. Valid entry: xx.
Bad IP Quality Events: The number of bad quality events that occur during a VoIP call. This number deter-
mines the overall quality of the call.
Autoswitch Flag. The terminating side of the autoswitch call initially terminates to the internal autoswitch
agent before the call is actually autoswitched. This termination generates an extra CDR in addition to the orig-
inal call that is autoswitched. This field identifies a call that is terminated to the autoswitch agent, 0 = normal
call, 1 = termination to the autoswitch agent.
Calling Party Number. The number called from. The format will be delivered in whatever format the PSTN
or PBX delivers to the Tenor CMS.
PIN Code. PIN code entered. 14 digits maximum. This field will be blank if a PIN code is not configured.
Local Call ID #. Unique identification number, generated by the local-side. Tenor CMS, for call record
matching purposes. Generated only for IP calls.
Remote Call ID #. Unique identification number, generated by the remote-side Tenor side CMS, for call
record matching purposes. Only generated for IP calls.
The following is a CDR field used in the extended format 4 and 104:
Incoming/Outgoing IP DN. If this is an incoming IP call, the number displayed will be the number as
received from the other endpoint. If this number is an Outgoing IP call, the number displayed will be the DN
as it was sent out over IP (Outgoing number plus prepended digits).