HP 480-0005-00-15 - Manual (Page 84)

P/N 480-0005-00-15 3-21
Chapter 3: Installation
Install Software Upgrade via CMS Software Update Utility
The CMS Software Upgrade Utility enables you to upgrade software and perform backup and restore proce-
dures. Both of these options are detailed below.
There are two ways you can upgrade your software: from disk or from the network. Both options are available
via CMS Software Update Utility.
Use the following instructions to install a software upgrade to a CMS unit.
Ensure you have the CD that was shipped with your unit. This CD contains upgrade files you are installing.
Upgrade from Disk
1. Access the CD ROM you received from Quintum and access <CDROM Drive>:\Software\Upgrade Util-
ity. (The latest copy of the upgrade utility is also available from www.quintum.com).
2. Double-click on CMS Upgrade Wizard. The Quintum Tenor CMS System Update Utility main screen will
be displayed. See Figure 3-19.
Figure 3-19 Main Upgrade Screen
3. Click on Update (from Update from Disk). A message will appear, asking you to first backup the current
files.
4. Click Yes to backup. (If you choose No, go to step 9.) The Tenor CMS Backup screen will be displayed.
See Figure 3-20.