HP 3550 - Manual (Page 152)

Control panel message Description Recommended action
64 PRINTER ERROR
For help press
alternates with
To continue
turn off then on
Scan buffer error. 1. Turn the printer off and then back on.
2. If the message persists, contact
HP Support.
68.X PERMANENT
STORAGE FULL
alternates with
To continue press
A non-volatile storage device is full.
Press to clear the message. Printing
can continue, but there could be
unexpected behavior.
X Description
1 for removable disk (flash or hard)
0 for onboard NVRAM
1. Press to continue.
2. For 68.0 errors, turn the printer off
and then back on.
3. If a 68.0 error persists, contact
HP Support.
4. For 68.1 errors, use the HP Web
Jetadmin software to delete files
from the disk drive.
5. For 68.1 errors that persist, contact
HP Support.
68.X PERMANENT
STORAGE WRITE FAIL
alternates with
To continue press
A non-volatile storage device is full.
Press to clear the message. Printing
can continue, but there could be
unexpected behavior.
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)
1. Press to continue.
2. If the problem persists, contact
HP Support.
68.X STORAGE ERROR
SETTINGS CHANGED
alternates with
To continue press
One or more printer settings saved in the
non-volatile storage device is invalid and
has been reset to its factory default.
Press to clear the message. Printing
can continue, but there could be
unexpected behavior. 1. Press to continue.
2. Turn the printer off and then back on.
3. If the message persists, contact
HP Support.
79.XXXX
PRINTER ERROR
alternates with
To continue
turn off then on
A critical hardware error has occurred. 1. Turn the printer off and then back on.
2. If the problem persists, contact
HP Support.
8X.YYYY
EIO ERROR
The EIO accessory card in slot X has
encountered a critical error. For the HP Color LaserJet 3700 series
printer only.
1. Turn the printer off and then back on.
2. If the problem persists, contact
HP Support.
Access Denied
MENUS LOCKED
An attempt has been made to modify a
menu item while the control panel
security mechanism is enabled by the
printer administrator. The message will
disappear shortly, and the printer will
return to Ready or BUSY state. Contact the printer administrator to
change settings.
Control panel messages (continued)
140 Chapter 8 Problemsolving ENWW