HP 3550 - Manual (Page 159)

Control panel message Description Recommended action
Printing...
REGISTRATION PAGE
The printer is generating the registration
page. The printer will return to the SET
REGISTRATION menu when the page
is completed. Follow the instructions on the printed
pages.
Printing...
SUPPLIES STATUS
The printer is generating the supplies
status page. The printer will return to the
online Ready state when the page is
completed. No action necessary.
Printing...
USAGE PAGE
The printer is generating the usage
page. The printer will return to the online
Ready state when the page is completed. For the HP Color LaserJet 3700 series
printer only.
No action necessary.
Processing... This message precedes all other
processing tasks, or appears when the
printer receives non-printable data. No action necessary.
Processing...
<JOB NAME>
The printer is currently processing a job
but is not yet picking pages. When paper
motion begins, this message will be
replaced by a message that indicates
which tray the job is being printed from. No action necessary.
Processing...
<JOB NAME>
alternates with
from tray X
The printer is actively processing a job
from the designated tray. No action necessary.
Processing...
INTERMITTENT MODE
alternates with
For help press
The printer has experienced a period of
heavy use. To maintain a supported
operating temperature, the printer will
print and pause in one-minute intervals. No action necessary.
To avoid intermittent mode in the future,
reduce the amount of heavy use.
RAM DISK DEVICE
FAILURE
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
A device failure has occurred on the
specified storage device.
1. Printing may continue for jobs that
do not require the RAM disk.
2. To remove this message from the
display, press .
RAM DISK FILE
OPERATION FAILED
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to
download a file to a non-existent
directory).
1. Printing may continue.
2. To remove this message from the
display, press .
3. If the message reappears, there
might be a problem with the
software application.
Control panel messages (continued)
ENWW Control panel messages 147