HP 3550 User Manual
Page 156
Control panel message
Description
Recommended action
LOAD TRAY X
<TYPE> <SIZE>
alternates with
To use another
tray press
Tray X is either empty or configured for a
type and size other than what is
specified in the job.
Press for help.
or
Press to print from another tray. See
for more information.
Loading
program X
alternates with
DO NOT POWER OFF
Programs and fonts can be stored on the
printer file system and are loaded into
RAM when the printer is turned on. The
number X specifies a sequence number
indicating the current program being
loaded.
For the HP Color LaserJet 3700 series
printer only.
No action necessary.
MANUALLY FEED
<TYPE> <SIZE>
alternates with
For help press
Tray 1 is empty and no other tray is
available.
Press for help.
or
for more
information.
MANUALLY FEED
<TYPE> <SIZE>
alternates with
To use another
tray press .
There is no paper in the tray and a print
job sent requires a specific paper type
and size that is not currently available
through Tray 1.
Press to print from another tray. See
for more information.
or
Press for help.
MANUALLY FEED
OUTPUT STACK
alternates with
Then press to
print second sides
The first side of a manual 2-sided print
job has been printed and the printer is
waiting for the output stack to be
inserted for the second side to be printed.
Take the output stack out of the output
bin and reinsert it in Tray 1 to print the
second side of the 2-sided print job. See
for more
information.
Moving solenoid
alternates with
To exit press
STOP key
The printer is executing a Component
Test and the component selected is
Solenoid.
No action necessary.
Moving solenoid
and motor
alternates with
To exit press
STOP key
The printer is executing a Component
Test and the components selected are
Solenoid and Motor.
No action necessary.
Control panel messages (continued)
144
Chapter 8 Problemsolving
ENWW