Hearth and Home Technologies 8000TR-OAK - Manual (Page 55)

Heat & Glo • 8000TR-OAK, 8000TR-OAK-IPI, 8000TRLP-OAKIPI • 2057-900 Rev. P • 11/08 55
STEP 5: (SRV2057-723): Mate the top of log 4 with the
right metal tab on log 3. The bottom of log 4 should touch
the inside face of the right grate tine.
2
3
1 2
3
1
5
4
2
3 5
6
STEP 7: (SRV2057-725): Place log 6 on log 2 as shown. The left end of log 6 should touch the upper knot of log 2. The right
end of log 6 should rest on the grate bar, centered between tine 4 and 5. NOTE: The front faces (C) of log 6 and 2 should
be on the same plane. This is key in avoiding fl ame impingement.
1
C
C
NOTE: Finished top view.
2
3
1
5
4
6
STEP 6: (SRV2057-724): Notch in left end of Log 5 will
interlock with front left corner of grate. Rest right end of log
so that it engages tab on log 3. Log 2 may need to shift to
right slightly.