HP 6200YL - Manual (Page 148)

IPv6 Management Security Features
Authorized IP Managers for IPv6
The next IPv6 command authorizes operator-level access for sixty-four IPv6
stations: thirty-two stations in the subnets defined by 0x0006 and 0x0007 in
the fourth block of an authorized IPv6 address:
ProCurve(config)# ipv6 authorized-managers
2001:db8:0000:0007:231:17ff:fec5:c967
ffff:ffff:ffff:fffe:ffff:ffff:ffff:ffe0 access operator
The following ipv6 authorized-managers command authorizes a single, automat­
ically generated (EUI-64) IPv6 address with manager-level access privilege:
ProCurve(config)# ipv6 authorized-managers
::223:04ff:fe03:4501 ::ffff:ffff:ffff:ffff
Editing an Existing Authorized IP Manager Entry. To change the mask
or access level for an existing authorized IP manager entry, enter the IPv6
address with the new value(s). Any parameters not included in the command
are reset to their default values.
The following command replaces the existing mask and access level for IPv6
address 2001:DB8::231:17FF:FEC5:C967 with
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FF00 and operator:
ProCurve(config)# ipv6 authorized-managers
2001:db8::231:17ff:fec5:c967
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ff00 access operator
The following command replaces the existing mask and access level for IPv6
address 2001:DB8::231:17FF:FEC5:3E61 with
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF and manager (the default values). Note
that it is not necessary to enter either of these parameters:
ProCurve(config)# ipv6 authorized-managers
2001:db8::a05b:17ff:fec5:3f61
Deleting an Authorized IP Manager Entry. Enter only the IPv6 address
of the configured authorized IP manager station that you want to delete with
the
no form of the command; for example:
ProCurve(config)# no ipv6 authorized-managers
2001:db8::231:17ff:fec5:3e61
6-14