Debug/syslog for ipv6, Configuring debug and event log messaging, Configuring debug and event log messaging -13 – HP 6200YL User Manual
Page 293
IPv6 Diagnostic and Troubleshooting
Debug/Syslog for IPv6
Debug/Syslog for IPv6
The Debug/System logging (Syslog) for IPv6 feature provides the same logging
functions as the IPv4 version, allowing you to record IPv4 and IPv6 Event Log
and debug messages on a remote device to troubleshoot switch or network
operation. For example, you can send messages about routing misconfigura
tions and other network protocol details to an external device, and later use
them to debug network-level problems.
Configuring Debug and Event Log Messaging
To specify the types of debug and Event Log messages that you want to send
to an external device:
■
Use the
debug < debug-type > command to send messaging reports for the
following types of switch events:
•
ACL “deny” matches
•
DHCP snooping events
•
Dynamic ARP protection events
•
Events recorded in the switch’s Event Log
•
IPv4 OSPF and RIP routing events
•
IPv6 DHCPv6 client and Neighbor Discovery events
•
LLDP events
■
Use the
logging < severity severity-level | system-module system-module>
command to select a subset of Event Log messages to send to an external
device for debugging purposes according to:
•
Severity level
•
System module
9-13