HP 6200YL - Manual (Page 198)

IPv6 Access Control Lists (ACLs)
Overview
3. Design the ACLs for the control points (interfaces) you have selected.
Where you are using explicit “deny” ACEs, you can optionally use the ACL
logging feature for notification that the switch is denying unwanted
packets.
4. Configure the ACLs on the selected switches.
5. Assign the ACLs to the interfaces you want to filter, using the ACL
application (static port ACL or VACL) appropriate for each assignment.
(For RADIUS-assigned ACLs, refer to the footnote in the table in step 1
on page 8-21.)
6. Test for desired results.
For more details on ACL planning considerations, refer to “Planning an ACL
Application” on page 8-27.
8-22