HP 6200YL - Manual (Page 234)

IPv6 Access Control Lists (ACLs)
Configuration Commands
The configuration of the example in the switch appears as follows:
Port-1(config)# show access-list config
ipv6 access-list "Test-01"
10 permit ipv6 2001:db8::1:10:10/128 ::/0
20 deny tcp 2001:db8::1:20:0/121 2001:db8::1:10:3/128 eq 23 log
30 deny ipv6 2001:db8::1:20:0/121 2001:db8::1:10:4/128 log
40 deny tcp 2001:db8::1:30:0/121 2001:db8::1:10:4/128 eq 23 log
50 deny ipv6 2001:db8::1:30:0/121 2001:db8::1:10:3/128
60 deny icmp ::/0 ::/0 133
70 permit ipv6 ::/0 ::/0
exit
Figure 8-13. CLI Listing of the ACL Entered by the Commands in Figure 8-12
8-58