Ipv6 management features, Tftpv6 transfers, Ipv6 time configuration – HP 6200YL User Manual
Page 38: Telnet6, Ipv6 management features -10, Tftpv6 transfers -10, Ipv6 time configuration -10, Telnet6 -10
Introduction to IPv6
Configuration and Management
IPv6 Management Features
The switch's IPv6 management features support operation in an environment
employing IPv6 servers and management stations.With a link to a properly
configured IPv6 router, switch management extends to routed traffic solu
tions. (Refer to the documentation provided for the IPv6 router.) Otherwise,
IPv6 management for the switches covered by this guide are dependent on
switched management traffic solutions.
TFTPv6 Transfers
The switch supports these downloads from an IPv6 TFTP server:
■
automatic OS download
■
manual OS download
■
command script download and execution
■
configuration file downloads
■
public key file downloads
■
startup configuration file downloads
The switch supports these uploads to an IPv6 TFTP server
■
startup or running configuration upload
■
OS upload from flash in current use (primary or secondary)
■
event log content upload
■
crash log content upload
■
output of a specified command
Refer to “TFTP File Transfers Over IPv6” on page 5-17.
IPv6 Time Configuration
The switch supports both Timepv6 and SNTPv6 time services. Refer to “SNTP
and Timep” on page 5-10.
Telnet6
The switch supports both of the following Telnet6 operations:
■
Enable (the default setting) or disable Telnet6 access to the switch from
remote IPv6 nodes.
■
Initiate an outbound telnet session to another IPv6 networked device.
Refer to “IPv6 Telnet Operation” on page 5-6
2-10