HP 6200YL - Manual (Page 153)

IPv6 Management Security Features
Secure Shell (SSH) for IPv6
Displaying an SSH Configuration
To verify an SSH configuration and display all SSH sessions running on the
switch, enter the
show ip ssh command. Information on all current SSH
sessions (IPv4 and IPv6) is displayed.
With SSH running, the switch supports one console session and up to five other SSH
and Telnet (IPv4 and IPv6) sessions.
Web browser sessions are also supported, but are not displayed in show ip ssh output.
ProCurve# show ip ssh
Source IPv6 IP addresses of SSH clients are displayed in hexadecimal format.
SSH Enabled : Yes Secure Copy Enabled : No
TCP Port Number : 22 Timeout (sec) : 120
Host Key Type : RSA Host Key Size : 2048
Ciphers : aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc,
[email protected],aes128-ctr,aes192-ctr,aes256-ctr
MACs : hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
Ses Type | Source IP Port
--- -------- + ---------------------------------------------- -----
1 console |
2 ssh |10.168.31.114 1722
3 inactive |
4
5
inactive |
inactive |
Displays the current SSH configuration and status.
6 inactive |
The switch uses these five SSH settings internally for transactions with clients.
Figure 6-12. Example of an SSH Configuration Display
6-19