Static acls, Radius-assigned acls, Static acls -6 – HP 6200YL User Manual
Page 182: Radius-assigned acls -6
IPv6 Access Control Lists (ACLs)
Overview of Options for Applying IPv6 ACLs on the Switch
Overview of Options for Applying IPv6
ACLs on the Switch
To apply IPv6 ACL filtering, assign a configured IPv6 ACL to the interface on
which you want the traffic filtering to occur. VLAN IPv6 traffic ACLs can be
applied statically using the switch configuration. Port traffic ACLs can be
applied either statically or dynamically (using a RADIUS server).
Static ACLS
Static ACLs are configured on the switch. To apply a static ACL, you must
assign it to an interface (VLAN or port). The switch supports two static ACL
applications:
■
VLAN ACL (VACL):
A VACL is an ACL configured on a VLAN to filter
IPv6 traffic entering the switch on that VLAN interface and having a
destination on the same VLAN.
■
Static Port ACL:
A static port ACL is an ACL configured on a port
to filter IPv6 traffic entering the switch on that port.
RADIUS-Assigned ACLs
A RADIUS-assigned ACL for filtering traffic from a specific client or group of
clients is configured on a RADIUS server. When the server authenticates a
client associated with that ACL, the ACL is assigned to filter the inbound IP
traffic received from the authenticated client through the port on which the
client is connected to the switch. If the RADIUS server supports both IPv4
and IPv6 ACEs, then the ACL assigned by the server can be configured to filter
both traffic types, or just the IPv4 traffic. When the client session ends, the
ACL is removed from the port. The switch allows as many RADIUS-assigned
ACLs on a port as it allows authenticated clients. For information on RADIUS-
assigned ACLs, refer to the chapter titled, “Configuring RADIUS Server Sup
port for Switch Services” in the latest Access Security Guide for your switch.
N o t e
This chapter describes the IPv6 ACL applications you can statically configure
on the switch. For information on static IPv4 ACL applications, refer to the
chapter titled “IPv4 Access Control Lists (ACLs)” in the latest Access Security
Guide
for your switch.
8-6