Command prompts, Screen simulations, Configuration and operation examples – HP 6200YL User Manual
Page 23: Command prompts -3, Screen simulations -3, Configuration and operation examples -3
Getting Started
Conventions
■
Italics indicate variables for which you must supply a value when execut
ing the command. For example, in this command syntax, you must provide
one or more port numbers:
Syntax: aaa port-access authenticator < port-list >
Command Prompts
In the default configuration, your switch displays a CLI prompt similar to the
following example:
ProCurve 8212zl#
To simplify recognition, this guide uses
ProCurve to represent command
prompts for all switch models. For example:
ProCurve#
(You can use the
hostname command to change the text in the CLI prompt.)
Screen Simulations
Displayed Text.
Figures containing simulated screen text and command
output look like this:
ProCurve> show version
Image stamp:
/sw/code/build/info
March 1, 2007 13:43:13
K.12.01
139
ProCurve>
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden
tification. For example:
ProCurve(config)# clear public-key
ProCurve(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile
Configuration and Operation Examples
Unless otherwise noted, examples using a particular switch model apply to all
switch models covered by this guide.
1-3