HP 6200YL - Manual (Page 236)

8-60
IPv6 Access Control Lists (ACLs)
Adding or Removing an ACL Assignment On an Interface
Figure 8-14. Methods for Enabling and Disabling VACLs
Filtering Inbound IPv6 Traffic Per Port and Trunk
For a given port, port list, or static port trunk, you can assign an ACL as a static
port ACL to filter switched IPv6 traffic entering the switch on that interface.
You can also use the same ACL for assignment to multiple interfaces. For limits
ProCurve(config)# vlan 20 ipv6 access-group List-010 vlan
ProCurve(config)# vlan 20
ProCurve(vlan-20)# ipv6 access-group List-015 vlan
ProCurve(vlan-20)# exit
ProCurve(config)# no vlan 20 ipv6 access-group List-010 vlan
ProCurve(config)# vlan 20
ProCurve(vlan-20)# no ipv6 access-group 015 vlan
ProCurve(vlan-20)# exit
Enables a VACL from the
Global Configuration
Level
Enables a VACL from a
VLAN Context.
Disables a VACL from the
Global Configuration
Level
Disables a VACL from a
VLAN Context.