Command line interface, Webagent (web browser interface), Need only a quick start – HP 6200YL User Manual
Page 27: Ip addressing, Command line interface -7, Webagent (web browser interface) -7, Ip addressing -7
Getting Started
Need Only a Quick Start?
Command Line Interface
If you need information on a specific command in the CLI, type the command
name followed by
help. For example:
Figure 1-3. Example of CLI Help
WebAgent (Web Browser Interface)
If you need information on specific features in the HP ProCurve WebAgent,
use the online Help. You can access the Help by clicking on the “Help” text in
any WebAgent screen.
To download the WebAgent help files to a local server, go to:
www.hp.com/rnd/device_help/download.htm
Follow the directions on the web page to download the WebAgent help for
your device.
Need Only a Quick Start?
IP Addressing
If you just want to give the switch an IP address so that it can communicate
on your network, or if you are not using VLANs, ProCurve recommends that
you use the Switch Setup screen to quickly configure IP addressing. To do so,
do one of the following:
■
Enter
setup at the CLI Manager level prompt.
Procurve# setup
1-7