Connecting the serial communications port – HP R2200 User Manual
Page 24
Installation 24
IMPORTANT: If using HPPM, connect the Management Server to an unswitched output receptacle ("
UPS R/T2200 NA/JPN/TWN rear panel
the Management Server as the last device to shutdown, ensuring that all connected load devices are
shutdown gracefully.
NOTE: To install and configure the software, see the software user guide. The software user guide is
Connecting the serial communications port
CAUTION: Use only the computer interface cable supplied with the UPS to connect the communications
port to the host computer.
CAUTION: Using a USB to serial converter cable will damage the UPS.
IMPORTANT: Power management software requires the communications port to be appropriately cabled
to the host computer.