Charging the ups batteries, Powering up the ups, Installing the erm as a tower – HP R2200 User Manual
Page 27
Installation 27
•
Connect the device power cords to the output receptacles on the rear panel of the UPS
(NA/JPN/TWN model).
-or-
•
Connect devices to the output receptacles on the rear panel of the UPS using the jumper cords
included with the UPS (INTL model).
Charging the UPS batteries
Allow the batteries to charge before putting the UPS into service.
IMPORTANT: Charge the batteries for at least 24 hours before supplying backup power to devices. The
batteries charge to:
•
90% of their capacity within 4 hours
•
100% of their capacity within 24 hours
Powering up the UPS
Press and hold the Power On/Standby button until the UPS beeps. The Power LED illuminates solid green,
indicating that power is available at the UPS output receptacles.
Installing the ERM as a tower
Before installing the unit, review and adhere to all warnings provided in "Precautions (on page