Document Outline

• Contents
• Safety
• Chapter 1. Introduction
  • Notices and statements in this document
  • Related documentation
• Chapter 2. Server setup roadmap
• Chapter 3. What is included with your server
  • Features and technologies
  • Specifications
  • Software
    • EasyStartup
    • EasyManage
  • Reliability, availability, and serviceability
• Chapter 4. Server controls, LEDs, and power
  • Front view
  • Rear view
  • System-board internal connectors
  • System-board external connectors
  • System-board switches and jumpers
  • System-board LEDs
  • Power-supply LEDs
  • Server power features
    • Turning on the server
    • Turning off the server
• Chapter 5. Installing and replacing optional devices
  • Installation guidelines
    • System reliability guidelines
    • Working inside the server with the power on
    • Handling static-sensitive devices
  • Server components
  • Removing the side cover
  • Installing the side cover
  • Removing the two-piece bezel
  • Installing the lower bezel
  • Installing the upper bezel
  • Removing a memory module
  • Installing a memory module
    • Unbuffered DIMMs (UDIMMs)
    • Registered DIMMs (RDIMMs)
  • Removing and installing internal drives
    • Removing a DVD drive
    • Installing a DVD drive
    • Removing a tape drive
    • Installing a tape drive
    • Removing a hot-swap hard disk drive
    • IDs for hot-swap hard disk drives
    • Installing a hot-swap hard disk drive
    • Removing a simple-swap hard disk drive
    • Installing a simple-swap hard disk drive
    • Power and signal cables for internal drives
  • Removing an adapter
  • Installing an adapter
  • Removing a PCI card
  • Installing a PCI card
  • Removing a USB embedded hypervisor flash device
  • Installing a USB embedded hypervisor flash device
  • Removing the virtual media key
  • Installing the virtual media key
  • Removing a hot-swap power supply
  • Installing a hot-swap power supply
  • Installing a security rope clip
  • Completing the installation
    • Reinstalling the two-piece bezel
    • Reinstalling the side cover
    • Connecting the cables
    • Updating the server configuration
  • Connecting external devices
• Chapter 6. Installing and replacing customer replaceable units
  • Removing the rear system fan
  • Installing the rear system fan
  • Removing the hard disk drive fan assembly
  • Installing the hard disk drive fan assembly
  • Removing the simple-swap backplate
  • Installing the simple-swap backplate
  • Removing the SAS/SATA hard disk drive backplane
  • Installing the SAS/SATA hard disk drive backplane
  • Removing the front-panel assembly
  • Installing the front-panel assembly
  • Removing the front USB connector assembly
  • Installing the front USB connector assembly
  • Removing the rear adapter retention bracket
  • Installing the rear adapter retention bracket
  • Removing the front adapter-retention bracket
  • Installing the front adapter-retention bracket
  • Removing the hot-swap power supply cage
  • Installing the hot-swap power supply cage
  • Removing the battery
  • Installing the battery
  • Removing and replacing FRUs
    • Removing a ServeRAID BR10-il controller
    • Installing a ServeRAID BR10-il controller
    • Removing an optional ServeRAID-MR10i SAS/SATA controller
    • Installing an optional ServeRAID-MR10i SAS/SATA controller
    • Removing an optional ServeRAID-MR10is VAULT SAS/SATA controller
    • Installing an optional ServeRAID-MR10is VAULT SAS/SATA Controller
    • Removing a non-hot-swap power supply
    • Installing a non-hot-swap power supply
    • Removing the microprocessor and fan sink
    • Installing a microprocessor and fan sink
      • Thermal grease
    • Removing the system board
    • Installing the system board
• Chapter 7. Configuring the server
  • Using the Setup Utility
    • Starting the Setup Utility
    • Setup Utility menu choices
    • Passwords
      • Power-on password
      • Administrator password
  • Using the Boot Manager program
  • RAID controllers
    • Using the WebBIOS utility
      • Starting the WebBIOS utility
      • Main menu of the WebBIOS utility
      • Creating a storage configuration using the Configuration Wizard
      • Viewing and changing adapter properties
      • Viewing and changing virtual disk properties
  • Using the ThinkServer EasyStartup program
    • Before you use the EasyStartup DVD
    • Setup and configuration
    • Configuring RAID
    • Using LSI Configuration Utility program
      • Starting the LSI Configuration Utility program
      • Formatting a hard disk drive
      • Creating a RAID array of hard disk drives
    • Typical operating system installation
  • Enabling the Broadcom Gigabit Ethernet Utility program
  • Configuring the Gigabit Ethernet controller
  • Updating the firmware
    • Using the EasyUpdate Firmware Updater tool
  • Starting the backup server firmware
  • Using the Integrated Management Module
  • Using the remote presence capability and blue-screen capture
    • Obtaining the IP address for the Web interface access
    • Logging on to the Web interface
  • Advanced Settings Utility program
  • Installing ThinkServer EasyManage software
    • Installation requirements
    • Installation order
    • Installing Windows 2008 32-bit components
      • Installing Web Server Role (IIS)
      • Installing Microsoft SNMP services
    • Uninstalling the LANDesk Software Agent
• Chapter 8. Troubleshooting
  • Troubleshooting tables
    • DVD drive problems
    • General problems
    • Hard disk drive problems
    • Intermittent problems
    • Keyboard, mouse, or pointing-device problems
    • Memory problems
    • Microprocessor problems
    • Monitor problems
    • Optional-device problems
    • Power problems
    • Serial port problems
    • Software problems
    • Universal Serial Bus (USB) port problems
  • Solving power problems
  • Solving Ethernet controller problems
  • Solving undetermined problems
  • Event logs
    • Viewing event logs through the Setup Utility
    • Viewing event logs without restarting the server
  • System-event log
  • POST error codes
  • Integrated management module error messages
  • Diagnostic programs, messages, and error codes
    • Running the diagnostic programs
    • Diagnostic text messages
    • Viewing the test log
    • Diagnostics messages
• Appendix A. Getting help and technical assistance
  • Before you call
  • Using the documentation
  • Getting help and information from the World Wide Web
  • Calling for service
  • Using other services
  • Purchasing additional services
  • Lenovo product service
• Appendix B. Notices
  • Trademarks
  • Important notes
  • Product recycling and disposal
  • Particulate contamination
  • Compliance with Republic of Turkey Directive on the Restriction of Hazardous Substances
  • Recycling statements for Japan
  • Battery return program
  • German Ordinance for Work gloss statement
  • Electronic emission notices
    • Federal Communications Commission (FCC) statement
    • Industry Canada Class A emission compliance statement
    • Avis de conformité à la réglementation d′Industrie Canada
    • Australia and New Zealand Class A statement
    • United Kingdom telecommunications safety requirement
    • European Union EMC Directive conformance statement
    • Germany Class A compliance statement
    • Japan Voluntary Control Council for Interference (VCCI) statement
    • Taiwan Class A warning statement
    • People′s Republic of China Class A warning statement
    • Korea Class A warning statement
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W