Removing the two-piece bezel – Lenovo 6528 User Manual
Page 50
3. Position the lip on the bottom edge of the side cover on the ledge on the bottom
of the chassis; then, rotate the cover up to the chassis. Press down on the
cover release latch and push the cover completely closed until it latches
securely into place.
4. Lock the side cover.
5. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
Removing the two-piece bezel
When you work with some devices, such as drives in bays 1 through 7 (see page
43), you must first remove the two-piece bezel to access the devices.
Note:
v
Before you remove the upper bezel, you must unlock and remove the side cover
and remove the lower bezel.
v
If you are removing only the lower bezel, you do not have to remove the side
cover. However, the side cover must be unlocked.
To remove the two-piece bezel, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
2. Unlock the side cover.
3. Remove the side cover (see “Removing the side cover” on page 32).
4. Press the round blue release button on the right side of the lower bezel and tilt
the lower bezel forward to disengage it from the chassis.
34
ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide