Lenovo 6528 User Manual
Page 43
the server is connected to ac power, the power-control button becomes active (the
power-on LED flashes slowly). You can turn on the server by pressing the
power-control button.
The server can also be turned on in any of the following ways:
v
If a power failure occurs while the server is turned on, the server will restart
automatically when power is restored.
v
If your operating system supports the Wake on LAN
®
feature, the Wake on LAN
feature can turn on the server.
Note: When 4 GB or more of memory (physical or logical) is installed, some
memory is reserved for various system resources and is unavailable to the
operating system. The amount of memory that is reserved for system resources
depends on the operating system, the configuration of the server, and the
configured peripheral component interconnect (PCI) devices.
Chapter 4. Server controls, LEDs, and power
27