Document Outline

• 761 SD Compact IC
• Table of contents
  • List of figures
• 1 Introduction
  • 1.1 Instrument description
  • 1.2 Parts and controls
    • 1.2.1 Front view
    • 1.2.2 Rear view
    • 1.2.3 Connection schematic
  • 1.3 Information on the Instructions for Use
    • 1.3.1 Organisation
    • 1.3.2 Notation and pictograms
  • 1.4 Safety notes
    • 1.4.1 Electrical safety
    • 1.4.2 General precautionary rules
• 2 Installation
  • 2.1 Flow chart
  • 2.2 Setting up the instrument
    • 2.2.1 Packaging
    • 2.2.2 Check
    • 2.2.3 Location
  • 2.3 Description of the connections
    • 2.3.1 Connection of capillaries/tubing
    • 2.3.2 Connection between capillaries/tubing
    • 2.3.3 Filter unit PEEK
  • 2.4 Connection of the detector block
  • 2.5 Installation of the MPak cabinet and connection of the drain tubes
    • 2.5.1 Installing the MPak cabinet
    • 2.5.2 Drain tube for inner compartment
    • 2.5.3 Drain tube for MPak cabinet
  • 2.6 Installing the eluent path
    • 2.6.1 High-pressure pump – Removing the transport security screws
    • 2.6.2 Connection MPak – high-pressure pump
    • 2.6.3 Connection high-pressure pump – injection valve
    • 2.6.4 Connection injection valve – suppressor
    • 2.6.5 Connection suppressor – detector
    • 2.6.6 Connection detector – waste
    • 2.6.7 Connection suppressor – waste
  • 2.7 Installing the regenerant path
    • 2.7.1 Fitting the pump tubing for regenerant
    • 2.7.2 Connection regenerant-MPak – pump tubing – suppressor – waste
  • 2.8 Installing the sample path
    • 2.8.1 Fitting the pump tubing for sample
    • 2.8.2 Connection sample vessel – pump tubing – injection valve – waste
  • 2.9 Connecting the 766 IC Sample Processor
    • 2.9.1 Installing the 766 IC Sample Processor
    • 2.9.2 Connecting the 766 IC Sample Processor
  • 2.10 Fitting the rear panel
  • 2.11 Mains connections
    • 2.11.1 Setting the mains voltage
    • 2.11.2 Fuses
    • 2.11.3 Mains cable and mains connection
    • 2.11.4 Switching the instruments on/off
  • 2.12 Connection to the PC
    • 2.12.1 Connecting cable 6.2134.100
    • 2.12.2 Software installation
    • 2.12.3 Basic settings «IC Net»
    • 2.12.4 Basic settings «IC Cap»
  • 2.13 Deaerating the pump and rinsing the pulsation dampener
    • 2.13.1 Deaerating the pump
    • 2.13.2 Rinsing the pulsation dampener
  • 2.14 Rinsing before fitting the column
  • 2.15 Precolumn and separating column
    • 2.15.1 Metrosep RP Guard
    • 2.15.2 Metrosep A Supp 1 HS separating column
  • 2.16 Attaching tubing to side panels
• 3 «IC Net»
  • 3.1 «IC Net» – User interface for the 761 SD Compact IC
    • 3.1.1 Systems - Methods
    • 3.1.2 Opening a system
    • 3.1.3 Opening a method
    • 3.1.4 Connect a system
    • 3.1.5 Instrument icon
    • 3.1.6 System parameters for linked system
    • 3.1.7 Hardware settings
  • 3.2 Systems supplied
    • 3.2.1 System "startup.smt"
    • 3.2.2 System "manual.smt"
    • 3.2.3 System "auto.smt"
    • 3.2.4 System "shutdown.smt"
• 4 «IC Cap»
  • 4.1 «IC Cap» introduction
    • 4.1.1 Login
    • 4.1.2 User interface
  • 4.2 «IC Cap» - Configuration
    • 4.2.1 Predefined configurations
    • 4.2.2 Configuration "manual.cfg"
    • 4.2.3 Configuration "auto.cfg"
• 5 Operation
  • 5.1 Operation with manual sample change
    • 5.1.1 Control with «IC Net» (manual operation)
    • 5.1.2 Control with «IC Cap» (manual operation)
  • 5.2 Operation with automated sample change
    • 5.2.1 Control with «IC Net» (automated operation)
    • 5.2.2 Control with «IC Cap» (automated operation)
• 6 Notes – Maintenance – Faults
  • 6.1 Practical notes on ion chromatography
    • 6.1.1 Separating columns
    • 6.1.2 High-pressure pump
    • 6.1.3 Eluents
    • 6.1.4 Peristaltic pump
    • 6.1.5 Suppressor module
    • 6.1.6 Connections
  • 6.2 Maintenance and servicing
    • 6.2.1 General information
    • 6.2.2 Passivation
    • 6.2.3 Shutdown
    • 6.2.4 Changing separating columns
    • 6.2.5 Maintenance work on the pump head
    • 6.2.6 Regeneration of the suppressor module
    • 6.2.7 Cleaning the suppressor
    • 6.2.8 Replacing the suppressor
    • 6.2.9 Replacing the pump tubing
  • 6.3 Faults and malfunctions
    • 6.3.1 Error messages
    • 6.3.2 Malfunctions and their rectification
  • 6.4 Diagnostic tests / Validation / GLP
• 7 Appendix
  • 7.1 Technical data
    • 7.1.1 Conductivity measurement
    • 7.1.2 Conductivity detector
    • 7.1.3 Injection valve
    • 7.1.4 High-pressure pump
    • 7.1.5 Peristaltic pump
    • 7.1.6 Suppressor module
    • 7.1.7 Leak detector
    • 7.1.8 RS232 interface
    • 7.1.9 Remote interface
    • 7.1.10 Mains connection
    • 7.1.11 Safety specifications
    • 7.1.12 Electromagnetic compatibility (EMC)
    • 7.1.13 Ambient temperature
    • 7.1.14 Housing
  • 7.2 Standard equipment
  • 7.3 Optional accessories
    • 7.3.1 6.5328.000 SD Spare Part Set
    • 7.3.2 Other optional accessories
  • 7.4 Warranty and conformity
    • 7.4.1 Warranty
    • 7.4.2 Declaration of Conformity
    • 7.4.3 Quality Management Principles
  • 7.5 Index