Hawking Technology HNC720G - Manual (Page 16)

Configuration Controls
Digital Output
Click on the “On” or “Off” buttons to enable or disable the digital output.
Snapshot
This button provides users with an easy way of capturing a single still image of the video from the Network Camera.
Client Settings
Clicking on this button links you to the client settings pages. Please review the section that follows for more details.
Configuration
Once the administrator’s password has been set, only the Administrator can access camera configurations.
Camera View
The information bar at the top of the camera view displays: a. the type of connection to the network camera, and b. the
current date/time. The camera view provides not only the live video, but also a way to direct the network camera to
different targets. You can use your mouse to click on the directional buttons and direct the network camera to various
targets.
Zoom
This feature allows users to open a digital zoom control window to specify the zoom factor/magnification level for a
specified area in the camera view. Users can also move the white frame to select the area in the camera view that they
want to view.
Disable Digital Zoom
The checkbox selection allows users to disable/enable the digital zoom function.
Zoom Factor
The zoom factor /magnification level range is from 100% to 400%. Users can select any integer value between 100 and
400 to magnify the viewing area inside the white square.
Hide
Clicking on this button will close the digital zoom control window.
Pan/Tilt Control Buttons
The directional buttons are for Left, Right, Up, Down, and Home. The Home button centers the camera.
Go To
Once the Administrator has determined the preset positions, users can direct the camera using this control.
Pan Speed
This button sets the speed of the “Left” and “Right” controls.
16