Hawking Technology HNC720G - Manual (Page 32)

SMTP
SMTP (mail) server 1: The domain name or IP address of the external email server.
Recipient email address 1: The email address of the recipients for snapshots or log files. Multiple recipients must be
separated by semicolons (i.e., ‘;’).
SMTP (mail) server 2: The domain name or IP address of another email server once the previous server is unreachable.
Recipient email address 2: The email addresses of the recipients for the backup server.
Return email address: The return email address used in the event that emails fail to be sent out.
FTP
Local FTP server port: This can be something other than the default Port 21. The user can change this to a value
between 1 and 65535. After the change, the external FTP client program must change the server port of connection
accordingly.
1st FTP server: The domain name or the IP address of the external FTP server. The corresponding user settings below
must be correctly configured for remote access.
1st FTP user name: Assigned user name on the external FTP server.
1st FTP password: Assigned password on the external FTP server.
1st FTP remote folder: Assigned folder on the external FTP server. The string must conform to that of the external FTP
server. Some FTP servers cannot accept preceding slash symbols before the path without virtual path mapping. Refer to
the instructions for the external FTP server for details. The folder privilege must be open for upload.
Primary FTP passive mode: The network camera is located inside the network protected by a firewall; data connection
for FTP may be prohibited. By selecting passive mode, the FTP can bypass the rule and allow snapshot upload to
proceed. If the passive mode is selected, the network camera can automatically make an attempt for active mode, if the
external FTP server does not support passive mode.
2nd FTP server: The domain name or IP address of the external FTP server.
2nd FTP user name: Assigned user name on the backup FTP server.
2nd FTP password: Assigned password on the backup FTP server.
2nd FTP remote folder: Assigned folder on the backup FTP server.
Secondary FTP passive mode: Passive mode setting for the backup FTP server.
Some invalid settings may cause the system to fail to respond. Change the configuration only if necessary and
consult with your network supervisor or experienced users for correct settings. If the system loses contact, refer to
Appendix A for reset and restore procedures.
32