Hawking Technology HNC720G - Manual (Page 39)

Camera Control
On the Camera Control page, there are two main function control areas:
Camera control area
The pan and tilt functions can be controlled with these buttons. The “Left”, “Right”, “Up”, and “Down” buttons aim the
camera accordingly. The “Home” button aims the camera to the center.
Pan speed: This controls the speed of the camera’s horizontal movement. The greater the value, the greater the angular
movement when utilizing the “Left” or “Right” functions.
Tilt speed: This controls the speed of the camera’s vertical movement. The greater the value, the greater the angular
movement when utilizing the “Up” or “Down” functions.
Auto pan/patrol speed: This defines the speed of auto panning and patrol. The greater the value, the faster the speed.
Preset function area
Enable IR control: Checking this box allows the Administrator to enable the IR controller (remote control) to move the
camera. To allow controls only through URL commands or web pages, leave this box unchecked.
Current position: If the User wants to save the current view as a preset location, enter a name for each of the current
video views at “current position” and click on the “Add” button. The camera allows for 20 preset locations.
Preset position: This keeps a list for preset positions. Clicking on the “Delete” button will remove the current selected
position from the preset list.
Dwelling time: The value set here specifies:
1. The stop time of each preset location during auto patrol of the network camera.
2. The stay time at the left-most and right-most positions when the network camera is auto panning.
Patrol selection: After the user has saved a list of preset positions, the “Preset locations” box will also keep a list of the
preset positions. And once the “Select>” button is clicked, the “Selected location” box will keep a list of the patrol stops.
The “Remove” button removes the preset position from the patrol stops. The “UP”, “DOWN” buttons adjust the order of
the patrol stops. Several preset positions can be added to the patrol stops. The camera can accept up to 40 patrol stops.
Save: The button is valid for “Pan speed”, “Tilt speed”, “Auto pan/patrol speed”, “Enable IR control”, “Dwelling time”
and “Patrol selections”. In other words, after changing these settings, if the “Save” button is not clicked, the new settings
will not take effect.
39