Hawking Technology HNC720G - Manual (Page 17)

Tilt Speed
This button sets the speed of the “Up” and “Down” controls.
Auto Pan (or Pan)
This button commands the camera to automatically pan from the current position to the left-most and then to the right-
most positions. After panning, the camera returns to the original position.
Auto Patrol (or Patrol)
This button commands the camera to automatically patrol between the preset positions on the Patrol List, which can be
modified on the “Camera control page”. After one patrol cycle, the camera returns to the original position.
Stop
This stops the “Auto Pan” or “Auto Patrol” command.
17