Furuno GP-3300 - Manual (Page 106)

11-9
Calculating R/B by latitude and longitude
You can calculate the range and bearing between two points by using
the cursor to designate the two points.
1. Press [MENU], [9] and [2] to display the CALCULATE RANGE/
BEARING menu.
9-2 CALCULATE RANGE/BEARING
MODE = CURSOR L/L WAYPOINT
START PT :
− − ° − −
.
− − −
’ N
− − ° − −
.
− − −
’ E
STOP PT :
− − ° − −
.
− − −
’ N
− − ° − −
.
− − −
’ E
RANGE :
− − − −
.
− −
NM BEARING :
− − −
.
− °
SELECT START AND STOP POINTS BY USING CURSOR,
PRESSING ENT AFTER EACH POINT.
PRESS CLR TO CALCULATE ANOTHER R/B.
Calculation
results
Figure 11-12 CALCULATE RANGE/BEARING menu
2. Select CURSOR from the MODE field.
3. Operate the trackball to select start point and then press ENT. A
green square marks start point.
4. Operate the trackball to select stop point and then press ENT. A
solid green line connects start and stop points and the calculation
results appear on the menu.
Calculating R/B by waypoint numbers
To find the range and bearing between two registered waypoints;
1. Press [MENU], [9] and [2] to display the CALCULATE RANGE/
BEARING menu.
9-2 CALCULATE RANGE/BEARING
MODE = CURSOR L/L WAYPOINT
START PT =
− −
STOP PT =
− −
RANGE :
− − − −
.
− −
NM BEARING :
− − −
.
− °
ENTER START AND STOP WAYPOINT NUMBERS.
PRESS CLR TO CALCULATE ANOTHER R/B.
Calculation
results
Figure 11-13 CALCULATE RANGE/BEARING menu