Furuno GP-3300 - Manual (Page 85)

9-3
3-1 SAVE TRACK
DATE CREATED POINTS
00 CREATE NEW FILE
01
02
03
06
07
TOTAL NO. OF FILES = 0
SELECT FILE TO BE SAVED USING
↑↓
.
ENTER FILE NAME BY USING TRACKBALL.
SET CURSOR ON OK BY USING TRACKBALL.
PRESS ENT TO SAVE.
Data input
cursor
Figure 9-4 SAVE TRACK display
5. The red cursor should be on 00. This will save data to a new file.
You may save data to an existing file name, in which case all
previous data on that file will be deleted.
6. Assign a file name. The file name may contain 32 alphanumeric
characters. You can switch between upper and lower case letters
by operating the [ZOOM IN], [ZOOM OUT] keys.
ZOOM
OUT
ZOOM
IN
(These are lower case characters.)
Figure 9-5 How to select upper and lower case letters