Furuno GP-3300 - Manual (Page 51)

4-4
5. Operate the trackball to place the cursor on position desired.
6. Press the [ENT] key.
7. Press the [WPT] key to finish.
Waypoint entry at own ship’s position
1. Press the [WPT] key to display the REGISTER WAYPOINT
menu.
REGISTER WAYPOINT
MODE = CURSOR L/L OS POS. R/B LIST
WPT NO.
=
− −
ENTER WAYPOINT NO.
PRESS ENT TO REGISTER WAYPOINT. + : DISPLAY
−
: NOT DISPLAY
Figure 4-4 REGISTER WAYPOINT menu
2. Select OS POS from the MODE field.
3. Select WPT NO.
4. Enter waypoint number in two digits.
5. Press the [ENT] key.
6. Press the [WPT] key to finish.
Waypoint entry by range and bearing
This method is useful when you want to enter a waypoint using range
and bearing to a target found on radar.
1. Press the [WPT] key to display the REGISTER WAYPOINT
menu.
2. Select R/B from the MODE field.
REGISTER WAYPOINT
MODE = CURSOR L/L OS POS. R/B LIST
WPT NO. =
− −
RANGE =
− − − . − − −
NM
BEARING =
− − − . − °
MAG
ENTER WAYPOINT NO., RANGE AND BEARING.
PRESS ENT TO DISPLAY WPT L/L.
PRESS ENT AGAIN TO REGISTER WAYPOINT.
+ : N, E, DISPLAY
−
: S, W, NOT DISPLAY
Figure 4-5 REGISTER WAYPOINT menu