Furuno GP-3300 - Manual (Page 70)

6-2
2. Place the cursor on the ARR/ANCHOR field.
3. Select ARRival.
4. Press [
↓
] to select ALARM RANGE.
5. Enter alarm range. To enter 0.05 nautical miles, for example, press
[0], [0], [5] and [0].
6. Press the [ENT] key.
Red dashed line
(Arrival alarm)
Figure 6-3 Alarm range of arrival alarm
Anchor watch alarm
The anchor watch alarm sounds to warn you that your ship is moving
when it should be at rest.
Setting
Alarm
range Alarm
sounds
Destination waypoint
Figure 6-4 How the anchor watch alarm works
1. Press the [ALARM] key to display the ALARM menu.
2. Select ANCHOR from the ARR/ANCHOR field.
3. Press [
↓
] to select ALARM RANGE.
4. Enter alarm range. To enter 0.2 nautical miles, for example, press
[0], [2], [0] and [0].
5. Press the [ENT] key.