Furuno GP-3300 - Manual (Page 95)

10-7
Setting GPS smoothing
The default GPS smoothing settings are suitable for most all condi-
tions. If change of the default settings is necessary, do the following
1. Press [MENU] and [8], and then press [
↑
] to set the cursor on
PAGE CHANGE (TO GPS INITIAL SETTINGS). The follow-
ing display appears.
GPS INITIAL SETTINGS
PAGE CHANGE (TO INITIAL SETTINGS)
POSITION FIXING MODE = 2D 3D 2D/3D
GEODETIC DATUM = WGS-84 WGS-72 TOKYO NAD
EURO AUST MISC (007)
HDOP THRESHOLD = 20 (2~99)
TIME DIFFERENCE = 09:00
LATITUDE = 34 ° 00. 000 N
LONGITUDE = 135
°
00. 000 E
DELTA LATITUDE = 00. 000 N
DELTA LONGITUDE = 00. 000 E
SMOOTHING = 00~00 L/L-SPEED (0~99)
ANTENNA HEIGHT = 030 M
COLD START = NO YES
CST SATELLITE NO. = 01
MIN. ELEVATION ANGLE = 05
°
(5~9)
DESELECT SAT NO. = — —
Figure 10-6 GPS INITIAL SETTINGS menu
2. Set the cursor on SMOOTHING.
3. Enter latitude and longitude smoothing time from 0 - 99 minutes
in two digits.
4. Enter speed and course smoothing time from 0 - 99 seconds in
two digits.
5. Press the [ENT] key.