Furuno GP-3300 - Manual (Page 105)

11-8
11.7 Calculating R/B Between Two Points
You can calculate the range and bearing between any two points.
Three methods are available: by latitude and longitude, by cursor,
and by waypoint numbers.
Calculating R/B by latitude and longitude
To calculate the range and bearing between latitude and longitude
points;
1. Press [MENU], [9], and [2] to display the CALCULATE RANGE/
BEARING menu.
9-2 CALCULATE RANGE/BEARING
MODE = CURSOR L/L WAYPOINT
START PT :
− − ° − −
.
− − −
’ N
− − ° − −
.
− − −
’ E
STOP PT :
− − ° − −
.
− − −
’ N
− − ° − −
.
− − −
’ E
RANGE :
− − − −
.
− −
NM BEARING :
− − −
.
− °
ENTER L/L START AND STOP POINTS.
PRESS CLR TO CALCULATE ANOTHER R/B.
Calculation
results
Figure 11-11 CALCULATE RANGE/BEARING menu
2. Select L/L from the MODE field.
3. Select the START PT line.
4. Enter latitude and longitude of start point.
5. Select the STOP PT line.
6. Enter latitude and longitude of stop point.
7. Press the [ENT] key. The calculation results appear.