Furuno GP-3300 - Manual (Page 109)

11-12
Mark/line memory
When the mark memory becomes full no marks can be entered.
New Marks
Current Marks
1600 pts
2800 pts
+ =
2800 pts
1200 pts
400 pts
1200 pts
Cannot enter
400 points.
Figure 11-17 What happens when the mark memory becomes full
and new marks are entered
New Marks
1600 pts
+ =
1400 pts
800 pts
Cannot enter
800 pts.
800 pts
800 pts
1800 pts
1400 pts
1800 pts
played back
Marks
Current Marks
Figure 11-18 What happens when the mark memory is full and
marks are added to existing and loaded marks
11.10 Apportioning the Memory
The default memory apportion is 4,000 points each of tracks and
marks. However, you may change that setting to suit your operating
needs.
If you want the memory apportion to be 5,000 points of track and
3,000 points of marks, for example, follow the procedure below.
Note: All track and marks are erased when the memory is reappor-
tioned.
1. Press the [MENU] key.
2. Press the [7] key to select APPORTION/DELETE MEMORY.
3. Press the [1] key to select APPORTION MEMORY.