Furuno GP-3300 - Manual (Page 39)

2-8
2.6 Customizing the Hold Function
The hold function stops recording the track to conserve track memory.
You can customize this functions as below.
Turning off track display when track is not being
recorded
When you stop recording the track in the default setting, the track is
displayed but not recorded. If you do not want to show the portion of
the track not recorded, you can turn it off as follows:
1. Press the [MENU] key.
2. Press the [8] key to select INITIAL SETTINGS.
3. Select OFF from the TRACK (HOLD PLOT) field.
4. Press the [ENT] key.
Line (hold plot) off
Figure 2-12 Appearance of track when track during
hold is not displayed
Connecting track after restarting track recording
The default hold function does not connect where recording is stopped
and restarted. If you want to connect those points do the following:
1. Press the [MENU] key.
2. Press the [8] key to select INITIAL SETTINGS.
3. Select ON from LINE (HOLD PLOT) field.
4. Press the [ENT] key.
Line (hold plot) on
Figure 2-13 Line connects track (not recorded)
after recording is resumed